|
|
|
|
InertGas™ Models
For parts with up to 50% combustibles.
Maximum 900ºF, 482ºC
The ultimate in safety...Pollution Control’s patented InertGas™ models can handle any combustible that can legally be removed with heat, even space-age engineered plastics. Our InertGas™ ovens (U.S. Patent 4,557,203) expand the Controlled Pyrolysis® system with enhanced abilities to clean parts with heat rather than with chemicals. InertGas™ models leave the primary burner on all the time during the initial “pyrolysis” stage of the cleaning cycle to produce an oxygen-deficient atmosphere inside the furnace, i.e., approximately 10% oxygen instead of the usual 21% as in the air. This reduction in oxygen eliminates the danger of fire and allows for the safe processing of highly combustible materials in larger volumes. During the initial pyrolysis stage, the furnace temperature controller and the stack temperature controller each operate double water spray mists at double set-points for maximum protection. During the final “oxidation” stage of the process, the primary burner cycles on and off, increasing the oxygen level in the oven to completely oxidize any remaining char or carbon off the parts. Other features include back-up water spray in case of clogged nozzles, manual-reset high-limit switch, automatic time cycles, automatic cool-down and an operating diagnostic panel. Optional melt collectors shorten cycle times and fuel expense because material melts and flows does not have to be completely pyrolyzed to be removed.
FEATURES:
- Special high temperature controller to 1,000ºF (538ºC). OPTIONAL.
- Automatic Time Cycle runs the furnace only as long as it takes to process the load and no longer. STANDARD.
- No cycle time or ramp recipe to select. Fully Automatic. STANDARD.
- Automatic Cool-Down, if secondary burner fails during a cycle. Back-Up Water Spray. STANDARD.
|
- Diagnostic Panel indicator lights reflect the operational status of the oven and its controls. Failure of a light to illuminate can help you pin-point operating problems. STANDARD.
- Door Switch, Purge Timer, Extra Gas Valve and High/Low Gas Pressure Switches add burner safety that may be required by some insurance company standards. STANDARD.
|
| |
|
SCTR Model Oven - CLICK HERE
for information on oven by downloading SCTR Cleaning Furnace Brochure.
IGG Model Oven - CLICK HERE
for information on ovens by dowloading IGG-27F & IGG-52 Cleaning Furnace Brochure, IGG Burn-Off Oven Brochure, Controlled Pyrolysis Cleaning Oven Brochure, or Automotive Parts Stripping Furnace Brochure.
For More Results, Click Here...
For More Results, Click Here...
|
